Pre filter

The PB International pre-filter is especially for drinking water installations. The pre-filter can be flushed manually and is suitable for cold and hot water. The compact construction ensures that the pre-filter is also extremely suitable for use with individual smaller appliances such as dishwashers and water dispensers.PB International invented the UFC module, which is an candle filter based on the ultrafiltration principle. Combined with an carbon filter it is the perfect solution for area's were chlorine is added to drinking water. We often install this solution for ice-cube machines, under the sink or in combination with an water dispenser. Check the UFC page for pictures and more information.

Specifications

ColorBlack- Red
Sizes (DxWxH)800-100x82x220 mm (excl. couplings)
Filtration principleSST Mesh filter
Pore size90 µm
MaterialBrass / stainless steel / fiberglass filled plastic
Maximum water temperature80°C
Capacity80 L/min
Minimum pressure2 bar
Maximum pressure16 bar
FixationVertical

 

ColorBlack- Red
Sizes (DxWxH)800-100x82x220 mm (excl. couplings)
Filtration principleSST Mesh filter
Pore size90 µm
MaterialBrass / stainless steel / fiberglass filled plastic
Maximum water temperature80°C
Capacity110 L/min
Minimum pressure2 bar
Maximum pressure16 bar
FixationVertical

 

ColorBlack- Red
Sizes (DxWxH)800-100x82x220 mm (excl. couplings)
Filtration principleSST Mesh filter
Pore size90 µm
MaterialBrass / stainless steel / fiberglass filled plastic
Maximum water temperature80°C
Capacity125L/min
Minimum pressure2 bar
Maximum pressure16 bar
FixationVertical